Welcome to xLights Sequences

A modern, easy to navigate, simple to use site to share your very own created xLights Sequences.
Not only that, we offer a marketplace where you can sell your own sequences or showcase them as a vendor!

John Williams mashup

Christmas Sequence John Williams mashup

danielrenwick

Sequence Sharer
Sequence Seller
Messages
22
Sequences
13
danielrenwick submitted a new resource:

John Williams mashup

Mash of some of John Williams theme songs. Around 100 hours has gone into this and it includes HD props, pixel forest, moving heads and many more.

To get the silhouettes moving across your show you will need to create a second "All" group. Mine is called "All (put on bottom for fades)". Make sure in your Display Elements and your Master View in the sequence tab that this second "All" group is down the very bottom of the list.

Please turn on allow...

Read more about this resource...
 
Messages
2
Can I ask please, how many channels on the controller do you need for something like this? Is it a particular controller you like? Thanks
 

danielrenwick

Sequence Sharer
Sequence Seller
Messages
22
Sequences
13
  • Seller
  • Thread starter
  • #5
Can I ask please, how many channels on the controller do you need for something like this? Is it a particular controller you like? Thanks
I like using Kulps, but there are plenty of other good controllers out there as well. One kulp 32 would do the job
 
Messages
7
General moving head question so I can get the orientation correct.... When mounted on your roof is the home position of the heads forward, left or right of the crowd? What do you have your xLights Pan and Tilt Orientations set to?
 

danielrenwick

Sequence Sharer
Sequence Seller
Messages
22
Sequences
13
  • Seller
  • Thread starter
  • #7
General moving head question so I can get the orientation correct.... When mounted on your roof is the home position of the heads forward, left or right of the crowd? What do you have your xLights Pan and Tilt Orientations set to?
It faces to the right in the home position. Pan orientation is 0 and tilt is 338. Let me know if you get stuck, I have put out a couple tutorial videos for those with the MHs facing different ways to be able to remap it in a couple of mins.
 
Messages
1
I run this squence on my controllers (Falcon and Kuklp) with xlights from my pc and it runs great. If I try to run it from my rasp Pi as the show master I do not see any of the GIFS come across. I load it with FPP so what am I missing?
 

danielrenwick

Sequence Sharer
Sequence Seller
Messages
22
Sequences
13
  • Seller
  • Thread starter
  • #9
I have no idea with Rasp pi5 sorry, I thought there was compatibility issues with 5 at the moment?
 
Top Bottom